Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1 Both Porcelain Etch and Silane may be used intraorally or extraorally.
Porcelain Etch is a viscous, buffered 9% hydrofluoric acid
Etch is easy to control and place
Will not stain composite or resin cement
Silane is a single-component solution
Yields the highest porcelain-to-resin bond strengths1
Ultradent Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max *) restorations2
For Porcelain Etch, use with Inspiral Brush tips. For Silane, use with Black Mini Brush tips.
Certified gluten free
MDA Registration No: GB1823623-155433
Technical Details
Viscous, Buffered 9% Hydrofluoric Acid
Porcelain Etch is a buffered, gelled hydrolic acid designed specifically to etch fractured dental porcelain and etching porcelain veneers, crowns, or inlays. It can also be used for etching porcelain crowns before bonding orthodontic brackets. It is buffered and gelled to minimize any irritation that could occur from the hydrofluoric acid vapor.
Etch is Easy to Control and Place
Porcelain Etch features a high visibility yellow hue so you can see exactly where it is placed. It is also viscous enough to stay where you place it.
Designed to Work Together
Porcelain Etch and Silane are designed to be used together when etching porcelain to provide high porcelain-to-resin bond strengths. Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1
Clinicals
Porcelain Surface Before and After Porcelain Etch
Diamond-cut porcelain surface. (Photo courtesy of Dr. Cornelis Pameijer)
Same porcelain surface following a 90-second etch with Ultradent Porcelain Etch. (Photo courtesy of Dr. Cornelis Pameijer)
Video
Procedures
Preparing the Porcelain
See Instructions for Use for complete instructions, warnings, and precautions.
Step 1
Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.
Step 2
CLINICAL TIP: Apply phosphoric acid (Ultra-Etch™ etchant) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.
Step 3
Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse.
Ultradent 90-second Porcelain Etch is used to etch porcelain veneers, crowns, bridges, inlays, onlays, and fractured dental porcelain. Ultradent 60-second Silane is used after hydrofluoric acid etching to prepare the surface for bonding resin.
Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1 Both Porcelain Etch and Silane may be used intraorally or extraorally.
Porcelain Etch is a viscous, buffered 9% hydrofluoric acid
Etch is easy to control and place
Will not stain composite or resin cement
Silane is a single-component solution
Yields the highest porcelain-to-resin bond strengths1
Ultradent Porcelain Etch and Silane may also be used on lithium disilicate (IPS e.max *) restorations2
For Porcelain Etch, use with Inspiral Brush tips. For Silane, use with Black Mini Brush tips.
Certified gluten free
MDA Registration No: GB1823623-155433
Technical Details
Technical Details
Viscous, Buffered 9% Hydrofluoric Acid
Porcelain Etch is a buffered, gelled hydrolic acid designed specifically to etch fractured dental porcelain and etching porcelain veneers, crowns, or inlays. It can also be used for etching porcelain crowns before bonding orthodontic brackets. It is buffered and gelled to minimize any irritation that could occur from the hydrofluoric acid vapor.
Etch is Easy to Control and Place
Porcelain Etch features a high visibility yellow hue so you can see exactly where it is placed. It is also viscous enough to stay where you place it.
Designed to Work Together
Porcelain Etch and Silane are designed to be used together when etching porcelain to provide high porcelain-to-resin bond strengths. Studies have demonstrated that Silane, when used with Porcelain Etch and a quality bonding resin, yields the highest bond strength to porcelain when compared with other porcelain bonding products.1
Clinicals
Clinicals
Porcelain Surface Before and After Porcelain Etch
Diamond-cut porcelain surface. (Photo courtesy of Dr. Cornelis Pameijer)
Same porcelain surface following a 90-second etch with Ultradent Porcelain Etch. (Photo courtesy of Dr. Cornelis Pameijer)
Video
Video
Procedures
Procedures
Preparing the Porcelain
See Instructions for Use for complete instructions, warnings, and precautions.
Step 1
Etch clean bonding surface with Porcelain Etch for 90 seconds, rinse, and dry.
Step 2
CLINICAL TIP: Apply phosphoric acid (Ultra-Etch™ etchant) for five seconds to remove porcelain salts and debris formed by hydrofluoric acid etching. Rinse and air dry.
Step 3
Apply a puddle coat of Silane to inside surface for 60 seconds, dry, and set prosthesis aside. Do not rinse.
